Show HP-UX kernel system parameter


# kmtune
Parameter Current Dyn Planned Module Version
===============================================================================
NSTRBLKSCHED - - 2
NSTREVENT 50 - 50
NSTRPUSH 16 - 16
NSTRSCHED 0 - 0
STRCTLSZ 1024 - 1024
STRMSGSZ 65535 - 65535
acctresume 4 - 4
acctsuspend 2 - 2
aio_listio_max 256 - 256
aio_max_ops 2048 - 2048
aio_physmem_pct 10 - 10
aio_prio_delta_max 20 - 20
allocate_fs_swapmap 0 - 0
alwaysdump 1 - 1
bootspinlocks - - 256
bufcache_hash_locks 128 - 128
bufpages 0 - (NBUF*2)
chanq_hash_locks 256 - 256
core_addshmem_read 0 Y 0
core_addshmem_write 0 Y 0
create_fastlinks 0 - 0
dbc_max_pct 50 - 50
dbc_min_pct 5 - 5
default_disk_ir 0 - 0
desfree - - 0
disksort_seconds 0 - 0
dmp_rootdev_is_vol 0 - 0
dmp_swapdev_is_vol 0 - 0
dnlc_hash_locks 512 - 4*128
dontdump 0 - 0
dskless_node - - 0
dst 1 - 1
effective_maxpid - - ((NPROC<=30000)?30000:(NPROC*5/4)) eisa_io_estimate - - 0x300 enable_idds 0 - 0 eqmemsize 15 - 15 executable_stack 1 - 1 fcp_large_config 0 - 0 file_pad - - 10 fs_async 0 - 0 ftable_hash_locks 64 - 64 hdlpreg_hash_locks 128 - 128 hfs_max_ra_blocks 8 - 8 hfs_max_revra_blocks 8 - 8 hfs_ra_per_disk 64 - 64 hfs_revra_per_disk 64 - 64 hp_hfs_mtra_enabled 1 - 1 hpux_aes_override - - 0 initmodmax 50 - 50 io_ports_hash_locks 64 - 64 iomemsize - - 40000 ksi_alloc_max 2208 - (NPROC*8) ksi_send_max 32 - 32 lotsfree - - 0 max_async_ports 50 - 50 max_fcp_reqs 512 - 512 max_mem_window 0 - 0 max_thread_proc 64 - 64 maxdsiz 0x10000000 - 0x10000000 maxdsiz_64bit 0x40000000 - 0x0000000040000000 maxfiles 60 - 60 maxfiles_lim 1024 Y 1024 maxqueuetime - - 0 maxssiz 0x800000 - 0x00800000 maxssiz_64bit 0x800000 - 0x00800000 maxswapchunks 2048 - 2048 maxtsiz 0x4000000 Y 0x04000000 maxtsiz_64bit 0x40000000 Y 0x0000000040000000 maxuprc 75 Y 75 maxusers 32 - 32 maxvgs 10 - 10 mesg 1 - 1 minfree - - 0 modstrmax 500 - 500 msgmap 42 - (2+MSGTQL) msgmax 8192 Y 8192 msgmnb 16384 Y 16384 msgmni 50 - 50 msgseg 2048 - 2048 msgssz 8 - 8 msgtql 40 - 40 nbuf 0 - 0 ncallout 515 - (16+NKTHREAD) ncdnode 150 - 150 nclist 612 - (100+16*MAXUSERS) ncsize 5596 - (NINODE+VX_NCSIZE)+(8*DNLC_HASH_LOCKS) ndilbuffers 30 - 30 netisr_priority - - -1 netmemmax - - 0 nfile 910 - (16*(NPROC+16+MAXUSERS)/10+32+2*(NPTY+NSTRPTY+NSTRTEL)) nflocks 200 - 200 nhtbl_scale 0 - 0 ninode 476 - ((NPROC+16+MAXUSERS)+32+(2*NPTY)) nkthread 499 - (((NPROC*7)/4)+16) nni - - 2 no_lvm_disks 0 - 0 nproc 276 - (20+8*MAXUSERS) npty 60 - 60 nstrpty 60 - 60 nstrtel 60 - 60 nswapdev 10 - 10 nswapfs 10 - 10 nsysmap 800 - ((NPROC)>800?2*(NPROC):800)
nsysmap64 800 - ((NPROC)>800?2*(NPROC):800)
o_sync_is_o_dsync 0 - 0
page_text_to_local - - 0
pfdat_hash_locks 128 - 128
public_shlibs 1 - 1
region_hash_locks 128 - 128
remote_nfs_swap 0 - 0
rtsched_numpri 32 - 32
scroll_lines 100 - 100
scsi_max_qdepth 8 Y 8
scsi_maxphys 1048576 - 1048576
sema 1 - 1
semaem 16384 - 16384
semmap 66 - (SEMMNI+2)
semmni 64 - 64
semmns 128 - 128
semmnu 30 - 30
semmsl 2048 Y 2048
semume 10 - 10
semvmx 32767 - 32767
sendfile_max 0 - 0
shmem 1 - 1
shmmax 0x4000000 Y 0X4000000
shmmni 200 - 200
shmseg 120 Y 120
st_ats_enabled 0 - 0
st_fail_overruns 0 - 0
st_large_recs 0 - 0
st_san_safe 0 - 0
streampipes 0 - 0
swapmem_on 1 - 1
swchunk 2048 - 2048
sysv_hash_locks 128 - 128
tcphashsz 0 - 0
timeslice 10 - (100/10)
timezone 420 - 420
unlockable_mem 0 - 0
vas_hash_locks 128 - 128
vnode_cd_hash_locks 128 - 128
vnode_hash_locks 128 - 128
vol_checkpt_default 10240 - 10240
vol_dcm_replay_size 262144 - (256*1024)
vol_default_iodelay 50 - 50
vol_fmr_logsz 4 - 4
vol_max_bchain 32 - 32
vol_max_nconfigs 20 - 20
vol_max_nlogs 20 - 20
vol_max_nmpool_sz 4194304 - (4*1024*1024)
vol_max_prm_dgs 1024 - 1024
vol_max_rdback_sz 4194304 - (4*1024*1024)
vol_max_vol 8388608 - (8*1024*1024)
vol_maxio 256 - 256
vol_maxioctl 32768 - 32768
vol_maxkiocount 2048 - 2048
vol_maxparallelio 256 - 256
vol_maxspecialio 256 - 256
vol_maxstablebufsize 256 - 256
vol_min_lowmem_sz 524288 - (512*1024)
vol_mvr_maxround 256 - 256
vol_nm_hb_timeout 10 - (10)
vol_subdisk_num 4096 - 4096
vol_vvr_transport 1 - (1)
vol_vvr_use_nat 0 - (0)
volcvm_cluster_size 16 - 16
volcvm_smartsync 1 - 1
voldrl_max_drtregs 2048 - 2048
voldrl_min_regionsz 512 - 512
voliomem_chunk_size 65536 - (64*1024)
voliomem_maxpool_sz 4194304 - (4*1024*1024)
voliot_errbuf_dflt 16384 - 16384
voliot_iobuf_default 8192 - 8192
voliot_iobuf_limit 131072 - 131072
voliot_iobuf_max 65536 - 65536
voliot_max_open 32 - 32
volraid_rsrtransmax 1 - 1
vps_ceiling 16 - 16
vps_chatr_ceiling 1048576 - 1048576
vps_pagesize 4 - 4
vx_fancyra_enable 0 - 0
vx_maxlink 32767 - 32767
vx_ncsize 1024 - 1024
vxfs_max_ra_kbytes 1024 - 1024
vxfs_ra_per_disk 1024 - 1024
vxtask_max_monitors 32 - 32

Popular posts from this blog

Howto configure boot device order on ILOM

To ensure the system can be installed using the DVD drive, the boot device order in the BIOS has to be configured correctly so that the DVD drive takes precedence over the internal hard drives. 1 Log into the ILOM. 2 Start the system if it is not already running: > start /SYS else reset the system: > reset /SYS 3 Log onto the system’s console: > start /SP/console 4 When prompted, press Esc 2 to enter setup. 5 Once the setup menu has loaded, navigate across to the Boot screen by using the right arrow key. 6 Using the down arrow key, select the Boot Device Priority item and press Enter. 7 Confirm that the item [CD/DVD] is higher in the list than the item [Hard Drive]. The order can be changed by selecting the relevant item and using the +/- keys to move the item up or down in the list. 8 Once the order is correct, save any changes made by pressing Esc and then navigate right to the Exit screen. Select the item Save Changes and Exit and press Enter, then confirm
Read more

SAN Switch Config Command

Login via console Fabric OS (swd77) swd77 console login: admin Password: Note: password default is "password" - set hostname swd77:admin> switchName swcdr1 Committing configuration... Done. swcdr1:admin> - set IP Address swcdr1:admin> ipaddrset Ethernet IP Address [192.168.0.25]: 192.168.0.11 Ethernet Subnetmask [255.255.255.0]: Fibre Channel IP Address [0.0.0.0]: Fibre Channel Subnetmask [0.0.0.0]: Gateway IP Address [192.168.0.25]: 0.0.0.0 Issuing gratuitous ARP...Done. 2008/07/14-18:46:43, [WEBD-1007], 494,, INFO, swcdr1, HTTP server will be restarted due to change of IP Address IP address is being changed...Done. Committing configuration...Done. - Configure basic parameter swcdr1:admin> switchDisable swcdr1:admin> configure Configure... Fabric parameters (yes, y, no, n): [no] y Domain: (1..239) [1] 22008/07/14-18:50:40, [FW-1424], 24,, WARNING, swcdr1, Switch status changed from HEALTHY to MARGINAL. 2008/07/14-18:50:40, [FW-1439], 25,, WARNING, swcdr
Read more

Howto cstm on HP-UX

If we want to show all machine information, just use cstm. # cstm Running Command File (/usr/sbin/stm/ui/config/.stmrc). -- Information -- Support Tools Manager Version C.46.05 (C) Copyright Hewlett Packard Co. 1995-2002 All Rights Reserved Use of this program is subject to the licensing restrictions described in "Help-->On Version". HP shall not be liable for any damages resulting from misuse or unauthorized use of this program. cstm> Map all device in this system with : cstm> map Dev Last Last Op Num Path Product Active Tool Status === ==================== ========================= =========== ============= 1 system system (1014) Information Successful 2 memory IPF_MEMORY (1014) Information Successful ------------ We want to know info about memory information cstm>sel d 2 cstm>
Read more