SAN Switch Show Command


- check and verify SAN Switch platform
swcdr1:admin> switchshow
switchName: swcdr1
switchType: 34.0
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:05:1e:04:a2:90
zoning: OFF
switchBeacon: OFF

Area Port Media Speed State
==============================
0 0 id N4 Online F-Port 50:01:43:80:01:3c:4a:58
1 1 id N4 Online F-Port 50:01:43:80:01:3c:4a:5c
2 2 id N4 No_Light
3 3 id N4 No_Light
4 4 id N4 No_Light
5 5 id N4 No_Light
6 6 -- N4 No_Module
7 7 -- N4 No_Module
8 8 -- N4 No_Module (No POD License) Disabled
9 9 -- N4 No_Module (No POD License) Disabled
10 10 -- N4 No_Module (No POD License) Disabled
11 11 -- N4 No_Module (No POD License) Disabled
12 12 -- N4 No_Module (No POD License) Disabled
13 13 -- N4 No_Module (No POD License) Disabled
14 14 -- N4 No_Module (No POD License) Disabled
15 15 -- N4 No_Module (No POD License) Disabled

- check and verify SAN Switch license
swcdr1:admin> licenseshow
SRQScdeSeTSRTdC:
Web license
Zoning license
Fabric license

- show IP configuration
swcdr1:admin> ipaddrshow

SWITCH
Ethernet IP Address: 192.168.0.11
Ethernet Subnetmask: 255.255.255.0
Fibre Channel IP Address: 0.0.0.0
Fibre Channel Subnetmask: 0.0.0.0
Gateway Address: 0.0.0.0

- Show date and timezone of SAN Switch

swcdr1:admin> date
Mon Jul 14 18:47:11 Localtime 2008

swcdr1:admin> tstimezone
Time Zone Hour Offset: 7
Time Zone Minute Offset: 0

- Show uptime SAN Switch

swcdr1:admin> uptime
10:16pm up 1 day, 3:22, 1 user, load average: 0.00, 0.00, 0.00

- Show firmware version of SAN Switch

swcdr1:admin> version
Kernel: 2.4.19
Fabric OS: v5.1.0b
Made on: Fri May 26 23:48:35 2006
Flash: Thu Mar 8 21:16:05 2007
BootProm: 4.5.3

Popular posts from this blog

Howto configure boot device order on ILOM

To ensure the system can be installed using the DVD drive, the boot device order in the BIOS has to be configured correctly so that the DVD drive takes precedence over the internal hard drives. 1 Log into the ILOM. 2 Start the system if it is not already running: > start /SYS else reset the system: > reset /SYS 3 Log onto the system’s console: > start /SP/console 4 When prompted, press Esc 2 to enter setup. 5 Once the setup menu has loaded, navigate across to the Boot screen by using the right arrow key. 6 Using the down arrow key, select the Boot Device Priority item and press Enter. 7 Confirm that the item [CD/DVD] is higher in the list than the item [Hard Drive]. The order can be changed by selecting the relevant item and using the +/- keys to move the item up or down in the list. 8 Once the order is correct, save any changes made by pressing Esc and then navigate right to the Exit screen. Select the item Save Changes and Exit and press Enter, then confirm
Read more

SAN Switch Config Command

Login via console Fabric OS (swd77) swd77 console login: admin Password: Note: password default is "password" - set hostname swd77:admin> switchName swcdr1 Committing configuration... Done. swcdr1:admin> - set IP Address swcdr1:admin> ipaddrset Ethernet IP Address [192.168.0.25]: 192.168.0.11 Ethernet Subnetmask [255.255.255.0]: Fibre Channel IP Address [0.0.0.0]: Fibre Channel Subnetmask [0.0.0.0]: Gateway IP Address [192.168.0.25]: 0.0.0.0 Issuing gratuitous ARP...Done. 2008/07/14-18:46:43, [WEBD-1007], 494,, INFO, swcdr1, HTTP server will be restarted due to change of IP Address IP address is being changed...Done. Committing configuration...Done. - Configure basic parameter swcdr1:admin> switchDisable swcdr1:admin> configure Configure... Fabric parameters (yes, y, no, n): [no] y Domain: (1..239) [1] 22008/07/14-18:50:40, [FW-1424], 24,, WARNING, swcdr1, Switch status changed from HEALTHY to MARGINAL. 2008/07/14-18:50:40, [FW-1439], 25,, WARNING, swcdr
Read more

Howto cstm on HP-UX

If we want to show all machine information, just use cstm. # cstm Running Command File (/usr/sbin/stm/ui/config/.stmrc). -- Information -- Support Tools Manager Version C.46.05 (C) Copyright Hewlett Packard Co. 1995-2002 All Rights Reserved Use of this program is subject to the licensing restrictions described in "Help-->On Version". HP shall not be liable for any damages resulting from misuse or unauthorized use of this program. cstm> Map all device in this system with : cstm> map Dev Last Last Op Num Path Product Active Tool Status === ==================== ========================= =========== ============= 1 system system (1014) Information Successful 2 memory IPF_MEMORY (1014) Information Successful ------------ We want to know info about memory information cstm>sel d 2 cstm>
Read more