Install Oracle Database 10g.2 Solaris Sparc 64


# /usr/sbin/groupadd oinstall
# /usr/sbin/groupadd dba
# /usr/sbin/useradd -g oinstall -G dba oracle
# passwd -r files oracle
# vi /etc/system
--------------
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10

# reboot

# vi /etc/passwd
-------------
oracle:x:100:100::/home/oracle:/bin/sh
-------------

# mkdir /home/oracle
# cp /etc/skel/* /home/oracle
# cd /home/oracle
# cp local.profile .profile
# cp local.login .login
# chown -R oracle:bin /home/oracle
# mkdir -p /app/oracle
# mkdir -p /oradata
# chown -R oracle:oinstall /app/oracle
# chown -R oracle:oinstall /oradata
# chmod -R 775 /app/oracle
# chmod -R 755 /oradata
# prctl -n project.max-shm-memory -v 6gb -r -i project user.root
# prctl -n project.max-sem-ids -v 256 -r -i project user.root

# su - oracle
$ vi .login
--------
umask 022

$ vi .profile
stty istrip
TMP=/tmp
TMPDIR=/tmp
export TMP TMPDIR

ORACLE_BASE=/app/oracle
ORACLE_SID=dbase
ORACLE_HOME=/app/oracle/product/10.2.0/
export ORACLE_BASE ORACLE_SID ORACLE_HOME

PATH=/usr/bin:/usr/ucb:/etc:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:$ORACLE_HOME/bin:.
export PATH

Login to Xwindow with user "oracle".
$ gunzip 10gr2_db_sol.cpio.gz
$ cpio -idm < 10gr2_db_sol.cpio$ ./runInstallerfollow the graphical installation ...for last session of installation you will be prompted to run this command as root.# /app/oracle/product/10.2.0/Db_1/root.shedit ORACLE_SID value based on your instalation, ex: dbase# su -# vi /app/oracle/product/10.2.0/Db_1/network/admin/listener.ora# su - oracle$ lsnrctl start$ sqlplus /as sysdbaSQL> startup

login to Oracle SQL Developer with username "system" and password that you filled on graphical installation.

Thanks to Anam for helping me.

Popular posts from this blog

Howto configure boot device order on ILOM

To ensure the system can be installed using the DVD drive, the boot device order in the BIOS has to be configured correctly so that the DVD drive takes precedence over the internal hard drives. 1 Log into the ILOM. 2 Start the system if it is not already running: > start /SYS else reset the system: > reset /SYS 3 Log onto the system’s console: > start /SP/console 4 When prompted, press Esc 2 to enter setup. 5 Once the setup menu has loaded, navigate across to the Boot screen by using the right arrow key. 6 Using the down arrow key, select the Boot Device Priority item and press Enter. 7 Confirm that the item [CD/DVD] is higher in the list than the item [Hard Drive]. The order can be changed by selecting the relevant item and using the +/- keys to move the item up or down in the list. 8 Once the order is correct, save any changes made by pressing Esc and then navigate right to the Exit screen. Select the item Save Changes and Exit and press Enter, then confirm
Read more

SAN Switch Config Command

Login via console Fabric OS (swd77) swd77 console login: admin Password: Note: password default is "password" - set hostname swd77:admin> switchName swcdr1 Committing configuration... Done. swcdr1:admin> - set IP Address swcdr1:admin> ipaddrset Ethernet IP Address [192.168.0.25]: 192.168.0.11 Ethernet Subnetmask [255.255.255.0]: Fibre Channel IP Address [0.0.0.0]: Fibre Channel Subnetmask [0.0.0.0]: Gateway IP Address [192.168.0.25]: 0.0.0.0 Issuing gratuitous ARP...Done. 2008/07/14-18:46:43, [WEBD-1007], 494,, INFO, swcdr1, HTTP server will be restarted due to change of IP Address IP address is being changed...Done. Committing configuration...Done. - Configure basic parameter swcdr1:admin> switchDisable swcdr1:admin> configure Configure... Fabric parameters (yes, y, no, n): [no] y Domain: (1..239) [1] 22008/07/14-18:50:40, [FW-1424], 24,, WARNING, swcdr1, Switch status changed from HEALTHY to MARGINAL. 2008/07/14-18:50:40, [FW-1439], 25,, WARNING, swcdr
Read more

Howto cstm on HP-UX

If we want to show all machine information, just use cstm. # cstm Running Command File (/usr/sbin/stm/ui/config/.stmrc). -- Information -- Support Tools Manager Version C.46.05 (C) Copyright Hewlett Packard Co. 1995-2002 All Rights Reserved Use of this program is subject to the licensing restrictions described in "Help-->On Version". HP shall not be liable for any damages resulting from misuse or unauthorized use of this program. cstm> Map all device in this system with : cstm> map Dev Last Last Op Num Path Product Active Tool Status === ==================== ========================= =========== ============= 1 system system (1014) Information Successful 2 memory IPF_MEMORY (1014) Information Successful ------------ We want to know info about memory information cstm>sel d 2 cstm>
Read more